Claude Opus 5.5 designed the PCB for Kookabus-01.
Then I asked it for a 3D printable enclosure.
First print. Board drops straight in and every connector lines up with its cutout!
Same model did the board and the box.
Claude is really impressing me.
Robots & gadgets
A PCB and 3D-printed case from the same model that fit on first print
Nigel Hungerford-Symes, who leads the PCB design tool TraceMaker, had Claude Opus 5.5 lay out the board for Kookabus-01, then asked it for a printable enclosure. On the first print the board dropped straight in and every connector lined up with its cutout.
232likes
24reposts
78saves
14Kviews
- Made with
- Claude Opus 5.5
- Role
- Lead on PCB design software TraceMaker
- Posted
